| P1121 ARAMIDE FIBER BRAIDED PACKING |
| |
 |
| |
 |
CHYGRATM |
| Aramide fiber braided packing is made of imported aramide yarn impregnated with PTFE dispersion and processed with lubricant,brided into square cross section. As the
strength and module of Kevlar is as high as the steel-like strength.
So this packing compared with other kinds of braided packing, they
can resist more serve media and higher pressure. It can be installed
separately or as end rings with other kinds of packing to combine
different characteristics into packing set. |
|
This packing is mainly used as substitite of asbestos
in pump systems. |
| Its property is better than asbestors, and it covers
all the services ranges which asbestos packing provided and more.
Under very bad conditions where ordinary asbestos packing can not
provided the satisfied effect. But this packing has long service.
It is usually applied to pulp factory, sand slurry, tin mine and feed
water pump of power plant etc. |
| |
| Main specification of Kevlar fiber
braided packing: |
Temperature
|
200~280°C |
Pressure
|
2~10MPa |
PH range
|
2~13 |
Density
|
1.4 g/cm3 |
| Velocity |
2~18m/s |
|
| |
|
| |
